Learning Outcomes

Conductors and Insulators in an Electric Circuit

Circuit Theorems

Capacitance and Magnetism

Lesson Summary

This module will guide you through the basic fundamentals of a direct current circuit. You will be introduced to the nature of electricity and laws developed by early scientists used for the calculation of components of DC circuits such as current passing through DC circuits, resistors and capacitors connected either in series or parallel.

Course assessment - Fundamentals of Electricity and DC Circuit Analysis

Explore the basics of electricity and learn its laws, theorems and how the DC circuit works in this free online course.

Basics of Electricity and DC Circuit Analysis

The history of electricity is fascinating and you find it in nature and the latest technology. This course explains how early scientists came up with laws and theorems such as Ohm’s law, Norton’s theorem and more. We examine the basic concepts of the DC circuit and how to apply them in modern life. You'll learn about electrical components such as resistors and capacitors, among others, and how to calculate voltage and current across DC circuits.

The basic concepts of electricity, dating back over two thousand years, were unveiled by early scientists. Over the years, scientists have unlocked the nifty mystery of electricity by studying and analysing the concepts of electricity using various scientific procedures or methods. Electricity has contributed immensely to the birth of civilization. Electrical energy is a common form of energy found in large amounts in power stations and small quantities in consumer devices like the calculator. Every home-based electronic device uses the basic concept of electricity in direct current (DC), which is essentially the movement of electrons through conductive materials. This course explores the fundamentals of a DC circuit. Discover the laws and theorems applied in DC circuits formulated by early scientists. Upon that, we will introduce you to the nature of electricity and go through relevant electrical equations.
Conductors, in simple terms, are materials (usually metals) that allow the free flow of electrons through them. However, several conductive materials differ in nature, which consequently affects the rate at which they allow electrons to flow through them. In this course, you will investigate several conductive materials, including those suitable in today’s application of electricity. As there are materials that allow the free flow of electrons through them, there are also materials that do not allow the free flow of electrons. Such materials are known as insulators. You will learn about insulators and why they do not allow the free passage of electrons through them. We will study Ohm’s law and how you can use it to calculate components such as current, voltages and resistors across a circuit. In addition, you will gain an understanding of the arrangements of resistors (materials that allow a certain amount of electric charge to pass through them) across a circuit and determine the total. We will also introduce you to circuit theorems such as Norton’s theorem and Thevenin’s theorem and the analytic method used to analyse several DC circuits.
The capacitor is an electrical component that stores energy in an electric field. Why does a capacitor store energy and not charge? You'll uncover the reason and how to arrange capacitors across a circuit. Conversely, magnets are materials that generate a magnetic field. Though invisible, they have forces that can attract ferromagnetic materials. However, the phenomenon associated with magnetic fields that arise from the motion of electric charges is known as 'magnetism'. This course will examine magnetism, including various equations used to calculate electromagnetism in DC circuits to determine factors such as magnetic flux, reluctance and permeability of a material. Furthermore, we will introduce you to Faraday’s law of induction and inductance. An understanding of basic mathematics and linear equations is required to take the course. It is for learners willing to understand the basic concepts of DC circuits of electricity. If you are curious and fascinated with the power of electricity, don’t hesitate: enrol and start this course today.

Layoffs Hit Udemy: 20% Out as Some Jobs Move Overseas

Udemy Appoints McKinsey Veteran as CEO Amid Growth Challenges

AI Prompting with Google: From Beginner to Certified

6 Best Influencer Marketing Courses for Marketers

10 Best Programming Courses for 2025

University of Sheffield Ends 11-Year Partnership with FutureLearn

DeepLearning.AI to Cross $100M in Sales on Coursera

[2025] 470+ Hours of Free LinkedIn Learning Courses with Free Certification

8 Best Geology Courses for 2025

2U Powered Degrees Pricing Chart: 112 Programs from $20K – $200K

Udemy vs Coursera: Comparing Online Learning Giants that IPO’d in 2021

Duolingo’s Restaurant Side Business Tops $1.3M

The Business of Online Education: A Deep Dive Into Udemy’s Financials

Medical Education Platforms with 800 Free Certificates & CME Credit

Harvard’s Intro to Python: Earn a Free Certificate

Learn English as a Second Language (ESL) with Hundreds of Courses & Sites

Aims & Objectives of ISO/IEC 17025:2017

Accrediting to ISO/IEC 17025:2017

Main Sections of ISO/IEC 17025:2017

This module presents the fundamental aspects of ISO/IEC 17025:2017 along with its aims and objectives. The module also explains different forms of standardized verbs used throughout the standard. Moreover, you will also learn the benefits of accrediting to ISO/IEC 17025. Lastly, an overview of the section's standard is also given.

General and Structural Guidelines for Laboratories

Resource Requirements for Testing Laboratories

Contracts, Validation, Sampling & Handling

Technical Records, Uncertainty, Results Validity, & Reports

In this module, you will encounter the essential requirements given in clauses 4, 5, 6, and 7 of ISO/IEC 17025;2017. However, the explanation of Clause 7 is provided till sub-clause - 7.8. Through this module, you will learn about the general, structural, resource, and process requirements of ISO/IEC 17025:2017.

Information Management, Complaints & Nonconformities (NCs)

Management System Requirements

Taking Corrective Actions

In this module, you will see discussions on ISO/IEC 17025:2017 beginning from sub clause 7.9 that puts forward the complaint requirements put forth by the standard. Furthermore, it presents the standard's requirements regarding management systems. Moreover, it also contains necessary measures to be taken for corrective actions.

ISO/IEC 17025:2017 - Laboratory Management System- Course Assessment

Learn about laboratory management systems laid out by the ISO 17025 international standard in this free online course.

ISO/IEC 17025:2017 - Laboratory Management Systems

This short course is designed for individuals and laboratories looking forward to their standardisation. We explain management standards defined by the ‘ISO/IEC 17025 general requirements for testing and calibration laboratories competence’ devised by ISO. This comprehensive course explains all the basic and essential requirements of the standard. It also provides a simplified clause-by-clause explanation of its four main sections.

Fundamentals of Pest Control

Pest Identification and Assessment

Non-Chemical Pest Control Methods

Chemical Pest Control Methods

This module will teach you the fundamentals of pest control, types of pests and their impact, pest life cycles and behavior, factors influencing pest infestations, pest identification and assessment, non-chemical pest control methods, genetic control and sterile insect, chemical pest control methods, and integrated pest management (IPM) approach.

Monitoring and Prevention

Sustainable Pest Management

Urban and Structural Pest Control

Topics you will learn in this module include but are not limited to pest monitoring techniques, preventive measures and exclusion strategies, ecological impact of pesticides, selective pesticide use and resistance management, organic and biodynamic pest management, pest management in residential areas, and commercial and industrial pest control.

Pest Control and Management - Assessment

This free online course teaches you how to use chemical and non-chemical pest control techniques to manage infestations.

Pest Control and Management

Pests make environments unhygienic and are a major cause of diseases, some of which may be lethal and difficult or expensive to cure. Effective pest management and control are necessary to keep a living and working environment free from health hazards. This course provides the knowledge and skills required to establish and maintain a successful pest control management programme and describes various pests, their life cycles and their behaviour.

Foundations of Construction Safety Management

Safety Management for Hazardous Environments

High-risk Site Activities and Demolition Safety

This module covers risk identification and mitigation in construction work and how to evaluate and manage risk in compliance with CDM regulations. You'll also learn how behaviour affects safety on construction sites, including safety measures for scaffolding, excavation, demolition and more.

Course Assessment - Site Management Safety Training Scheme (SMSTS)

Learn how to manage safety on construction sites in accordance with UK legal provisions in this free online course.

Site Management Safety Training Scheme (SMSTS)

Construction workers are often vulnerable to injuries and hazards so ensuring safety is maintained consistently is crucial for both site managers and workers. This course covers the essential knowledge needed for maintaining safety on construction sites. You'll learn to identify and assess risks while adhering to UK industry regulations. In addition, we'll discuss safety measures to take during erecting scaffolding, excavations and demolitions.

Introduction to Hot Work

Classification of Hot Work Areas

Roles and Responsibilities

Hot Work Permit

Hot Work Risk Assessment

Essential Safety Precautions

This module will familiarize you with hot work processes, including their potential hazards and safety precautions. You'll learn how to assess the risks associated with hot work and determine appropriate control measures. You'll also understand the hot work permit system and the roles & responsibilities of those involved in the permitting process.

Hot Work Safety - Course Assessment

Learn how to manage the hazards associated with hot work processes in this free online health and safety course.

Hot Work Safety

This hot work safety training equips you with the essential knowledge to recognize and mitigate hot work hazards. You'll understand the hot work risk assessment process and hierarchy of controls for effectively reducing risks. The course explains the hot work permit system along with the roles and responsibilities of those involved in the permitting process. You'll also gain a clear understanding of hot work permitted and prohibited areas.

Introduction to Traffic Marshalling

Traffic Management

Temporary Traffic Control

Traffic Risk Assessment

Vehicle Signaling

Reversing Vehicles

Health and Safety

In this module, we will look at the fundamental objectives of traffic marshalling and the general duties of a traffic marshal. A traffic marshal's responsibilities when controlling traffic on a highway or construction areas shall be examined. Assessing risks along with health and safety concerns of traffic near construction areas will be assessed.

Construction Safety: Traffic Marshalling - Course assessment

Train as a traffic marshal or bankman who provides traffic management on construction sites in this free online course.

Construction Safety: Traffic Marshalling

This course takes an in-depth look at the role of traffic marshals on construction sites. Traffic management is important to maintaining health and safety as the presence of heavy machinery and large vehicles creates a need for the efficient direction of traffic. Traffic management in such a busy area faces hazards and safety risks, which we identify in this course. Sign up to train as a traffic marshal or bankman and add a skill to your CV.

Introduction to the AS Standards

Organization's Context and Leadership

QMS Planning and Support

This module introduces students to the AS standards for suppliers of the aviation industry. It explains the importance of regulations in the aerospace industry and navigates them through the journey of different AS standards. It also explains the requirements of Clauses 4, 5, 6, and 7 of this standard.

Organizational Operations

Operations and Evaluation

Organizational Improvement

This module explains the requirements of Clauses 8, 9, and 10 of AS9100D. These requirements are regarding organizational operations, evaluation, and continuous improvement of the organizational operations.

AS9100D Quality Management System (QMS) for Aerospace Industry - Course Assessment

Learn the requirements of AS9100D for the developers and suppliers of components for the aerospace & defense industries.

AS9100D Quality Management System (QMS) for Aerospace Industry

This course explains different clauses and their various requirements for the organizations that develop, design, or supply parts, components, and assemblies concerned with the aerospace and defense industries. After enrolling, the students will be able to navigate the differences between the different versions of the AS standards. Moreover, they will also get a simple and straightforward explanation of this standard's requirements.

Introduction to Hazardous Materials Handling - Learning Outcomes

Understanding Hazardous Materials

Legal and Regulatory Compliance

Importance of Hazard Communication

Risk Assessment and Management

Personal Protective Equipment (PPE) for Hazardous Materials Handling

Introduction to Hazardous Materials Handling - Lesson Summary

In this module, participants will have a solid foundation in understanding hazardous materials, legal and regulatory compliance, hazard communication, risk assessment, and the proper use of personal protective equipment. This knowledge is essential for creating a safe and compliant working environment in industries dealing with hazardous materials.

Hazardous Materials Storage and Transportation - Learning Outcomes

Proper Storage Practices for Hazardous Materials

Managing Segregation and Compatibility of Hazardous Materials

Emergency Preparedness for Hazardous Materials Storage

Transportation Regulations

Handling Hazardous Materials in Transit

Emergency Response Planning

Case Studies and Lessons Learned

Hazardous Materials Storage and Transportation - Lessons Summary

This module covers storing hazardous materials, segregation and compatibility, and developing emergency response plans. Learn DOT regulations, proper labelling, packaging, and security measures for transportation, best practices for loading/unloading and case studies.

Advanced Hazardous Materials Handling Techniques - Learning Outcomes

Decontamination Procedures

Confined Space Entry Protocols

Managing Hazardous Waste

Best Practices for Chemical Spill Response

Continuous Improvement in Hazardous Materials Handling

Advanced Hazardous Materials Handling Techniques - Lesson Summary

This module covers decontamination techniques to ensure health, safety, and regulatory compliance. Learn to manage decontamination zones, handle confined space hazards, and apply physical, chemical, thermal, and radiological decontamination. Develop skills in PPE selection, emergency response planning, and environmental protection.

Hazardous Materials Handling Mastery - Course Assessment

Gain expertise, ensure safety, and excel in hazardous materials handling with this comprehensive free online course.

Hazardous Materials Safety Specialist

This course covers the classification, legal compliance, and risk assessment of hazardous materials. It delves into communication standards, PPE usage, and storage guidelines. Transportation regulations and emergency response planning are also covered. Advanced techniques include decontamination, confined space entry, hazardous waste management, chemical spill response, and continuous improvement through safety audits and case studies.